This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Lan to Lan VPN Routing outside the profile

I would be greatful fo any advice or assitance anybody can provide me.

This is difficult to pose as a question, let me set the scene.

Subnet A 10.1.0.0 /16
Subnet B 10.2.0.0 /16
Subnet C 10.3.0.0 /16 


This thread was automatically locked due to age.
Parents

  • Are IPSec vpn's restricted to routing between the the two networks used to define the connection...


    Yes, routing is only done between the defined (local and remote) networks.
  • I was hoping this wasn't going to be the response, but expected it.  We've been using this technology for years and has been working fine until the company grew....

    I'm going to start looking into other possible protocols to implement.

    Can you recommend any technologies that would allow routing on top of VPN connections?
Reply
  • I was hoping this wasn't going to be the response, but expected it.  We've been using this technology for years and has been working fine until the company grew....

    I'm going to start looking into other possible protocols to implement.

    Can you recommend any technologies that would allow routing on top of VPN connections?
Children
  • Just establish a second VPN tunnel, so c is able to cummunicate with B.

    or just change C to a 172.20.1.0/16 net and establish the tunnel with a 10.0.0.0/8.

    Astaro user since 2001 - Astaro/Sophos Partner since 2008