This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN, how to route traffic over IPSec.

Hi,
This is my VPN site to site configuration/routing issue.

System:
ASL 6.2 latest, and home/office licens on all systems.

Configuration setup:
(inside addresses)

Site-A = 10.1.1.0/24
vpn to Site-B (10.1.1.0/24 -> 10.1.2.0/24)

Site-B = 10.1.2.0/24
vpn to Site-A (10.1.2.0/24 -> 10.1.1.0/24)
vpn to Site-C (10.1.2.0/24 -> 10.1.3.0/24)

Site-C = 10.1.3.0/24
vpn to Site-B (10.1.3.0/24 -> 10.1.2.0/24)

Question:
How can I configure vpn connections to accept or route traffic from Site-A -> Site-C over the Site-B tunnels ? 
(I don´t want to do 10.1.0.0/16 subnets for the vpn connections)

I have tested static route.
Tested multiple tunnels.
Tested other subnet configurations for the vpn, Any - net, None...

Is this even possible in 6.2 or do I wait for 7.0?

Thanks
Göran


This thread was automatically locked due to age.