This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to map a network drive ?

 Hi guys, I created a IPSec VPN between two ASL 5.202s and it works fine, the tunnel is established, routes are set.

In the packet filter i set the rules:

Internal Network -> any -> Remote-VPN-Network -> Allow
Remote-VPN-Network -> any -> Internal Network -> Allow

I can ping clients from both sites, but mapping network drives 
using net use x: \192.168.1.101\share doesn`t work.
When I use \192.168.1.101\share in the windows explorer, no
authentication popup is to see, so i think rights a not the problem. 

I also tried the packet filter rules:
Internal Network -> Any -> IPSecPool -> Allow
IPSecPool -> Any -> Internal Network -> Allow
but this also didn`t work.

The networks have got the same workgroups, the mapping 
in in the netwroks themselves works.

Does someone know a solution for this, would be nice if you post.
Thanks


This thread was automatically locked due to age.
Parents
  • To give feedback if some got the problem in future.
    My ASL settings on both sites were correct, see my first post.
    The problem was that the share which should get mapped was
    on a win xp pro sp2 machine with activated firewall.
    file and printer sharing was enabled, but only for the own subnet.
    so you have define by yourself the settings that the share is also 
    allowed for the vpn subnet, now it works
Reply
  • To give feedback if some got the problem in future.
    My ASL settings on both sites were correct, see my first post.
    The problem was that the share which should get mapped was
    on a win xp pro sp2 machine with activated firewall.
    file and printer sharing was enabled, but only for the own subnet.
    so you have define by yourself the settings that the share is also 
    allowed for the vpn subnet, now it works
Children
No Data