This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Roadwarriors VPN connection:ASL behind NAT router

On my internet router (no vpn pass-thru :-( ) I forward this following ports to ASL 5.023 external IP address (192.168.0.13):

UDP 500 (IKE)
IP protocol 50 (ESP)
IP protocol 51 (AH)
My router is doing NAT so I open also UDP 4500 (IKE)

Is it correct?

Following the Roadwarriior/PPTP Astarov5  pdf guidebook,
I also done the ASL and vpn client settings but I have 2 doubts:

When I create the CSR’s (Certificate Signing Request)  for my ASL  I wrote the ASL external IP (in my case 192.168.0.13)

Instead when I configured the vpn client as gateway (figure 25 page10) I digited my  external static IP of my  telecom router.

That's correct?

that's my NET layout

internal net  192.168.0.13--------192.168.0.20  external IP (internet) 

THANKS in advance for your support

Alex


This thread was automatically locked due to age.
50311-VPN_Support_request.pdf