This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC Problem, ping nicht möglich Laptop >>Office

Hallo.
Ich habe das Howto IPSEC_Roadwarrior_Guidebook.pdf benutzt um eine VPN Verbindung von meinem Laptop zu meinem Privatserver herzustellen. Die VPN Verbindung wird ohne probleme aufgebaut, nur pingen kann ich das Netzwerk nicht. Ich erreiche auch keinen PC im Netzwerk. Ich nutze als Client die Testversion von SSH Sentinel. Leider fehlt in der Dokumentation die Seite 14 und 15, wenn ich diese hätte dann wäre das Problem sicherlich auch gelöst. Ist irgend jemand in der Lage mir die Komplette Doku ohne fehlende Seiten zu schicken, oder den Link hier zu Posten? 
Die Dokumentation habe ich unter docs.astaro.org gefunden.

Hier ein paar Infos zum aufbau, falls jemand weiterhelfen will/kann.
Ich nutze die Version 5 von Astaro
VPN Client: SSH Sentinel 
Homenetzwerk: 192.168.1.0 / 255.255.255.0
Remote PC (laptop) mit GPRS Card von Vodafone. Ich erhalte bei Verbinden die IP 192.168.10.1 / 255.255.255.0 von der Astaro. 
Wenn ich in der Astaro und im Client z.B. die IP 192.168.1.100 / 255.255.255.0 einrichte, dann kann ich mit der Astaro nicht verbunden werden. 

Ich bitte um Hilfe....

Danke
Steffan


This thread was automatically locked due to age.
Parents
  • steffan,
    if you have set up packet filter rules for the vpn tunnel and even so the traffic does not flow through the tunnel, your provider probaly uses NAT for the GPRS connection. Please enable 'NAT-T' on your Sentinel and disable 'Discover Path MTU'. Hopefully that will do the trick.
    /bagira
Reply
  • steffan,
    if you have set up packet filter rules for the vpn tunnel and even so the traffic does not flow through the tunnel, your provider probaly uses NAT for the GPRS connection. Please enable 'NAT-T' on your Sentinel and disable 'Discover Path MTU'. Hopefully that will do the trick.
    /bagira
Children
No Data