I have two ASL V4.0.22 and I have established an IPSEC tunnel, everything ok up to here. My problem is that I only have comunication from site A to site B, when I try to start a connection in the reverse way the packets are drop at site B.
More info:
Site A:
Network: 192.169.1.0/24
Internet: Fixed IP - ADSL
Site B:
Internal Network: 192.168.0.0/16
Internet: Fixed IP - ADSL
The tricky part is on site B as the internal interface ETH0 as the IP 192.168.9.250 and I must contact 3 machines in subnet 192.168.0.X my prob is that I pass a second firewall (not mine) to get there, this firewall as the IP 192.168.9.254/24 on the ASL side, and the IP 192.168.0.146 on the other. I added a fixed route saying that all the trafic for the subnet 192.168.0.0/16 should pass throu 192.168.9.254 and it works ok.
I have added the necessary rules on both ASL (I think), as packets travel one way but not the other.
If needed I can post some logs.
Many thanks in advanced.
This thread was automatically locked due to age.