This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing on pptp doesn´t work correct

Hello all,

I have a problem ...;-))

I have setup an access via pptp on ASL 4.012.

If I connect from outside to the firewall via pptp it works. I can connect the shares from w2k.

Now when I connect an unix host via telnet through the pptp, then works it fine. But if I make an export of the DISPLAY to  my IP address (which the computer gets during the negotiation) an start a x-session it doesn´t work!

If I use ssh an tunel the x it´s working.

I looked for the way wich the packets use and have discovered:

ASL doesn´t send the packet to the pptp client whether there is a routing entry for the iproadwarriornetwork which is generated by ASL. The packets take the route to internet.
But even telnet, ssh works correct I don´t know what are wrong.

An example of the routing entry

192.168.111.3   0.0.0.0   255.255.255.255 UH on interface ppp0
the pptp ip of the firewall is 192.168.111.1/24

For pptp clients is set in rules for services rule any.

Does somebody have had the same problem and resolved?

Greetings Robert

This thread was automatically locked due to age.