This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN Setup Astaro4.009...Sentinel1.4.1

Hi,
I try to setup the following Konfig:
Astaro...Internet....DSL-Router@home=Sentinel1.4.1

10.8.85.0/24===yyy.xxx.zzz.10...aaa.bbb.ccc.ddd[10.8.81.71]===10.8.102.11/32

Office-Net is 10.8.85.0/24
fixed Astaro @ office IP = yyy.xxx.zzz.10

dyn.ext.Adr@home = aaa.bbb.ccc.ddd
Home-Net is 10.8.81.0/24
RoadWarriorNotebook get's via DHCP 10.8.81.71 at home,
and in other locations other local-Ip-Adrs.
Thats why I'm manual setting in Sentinel1.4.1 Accuire Virtual IP Adr (which is fixed to 10.8.102.11).
I'm using PSK.

But Astaro is not able to assign a tunnel.

Any idea, to setup my Roadwarrior, which I ant to use in
a lot of different Sub-Nets (with NAT, and without NAT...)

Stefan

This thread was automatically locked due to age.

0 billkershner over 22 years ago

I think there is a setting in Sentinel software for enabling NAT Traversal support...somewhere in the options for tunnel definition. I'd start with the Sentinel documentation in this setup

Hope this helps,

Bill
Cancel
Vote Up 0 Vote Down

Cancel