This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MS PPTP Server in DMZ + DMZ Design

Hi,

We got our ASL4 for about 3 weeks. Our configuration at 
THIS time is as follows:

5 internal NICS available but only 2 used at this time.
eth0 internal network (172.16.101.100 - 255.255.0.0)
eth1 internet (62.158.149.211 - 255.255.255.248 - GW: 62.158.149.209)

Our goal is to create a DMZ where we want to place a MS PPTP Server.

As you can see we have public ip range from 
62.158.149.210 to 62.158.149.214 available
(209 is the ISP´s Router und 215 the SN Broadcast).

How would you suggest to create a DMZ and what Rules and
Routings Should be applied to place a pptp Server in the DMZ and make it available from outside. Also, what Rules should be applied to empower the pptp Server to access the internal network?

the best regards
Jörg

  


This thread was automatically locked due to age.