This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PPTP for a 2000 client is OK but a 98 client will fail

Hi,

windows 2000 'road warrior'  clients are connecting to pptp  fine. However, a couple of 98SE clients fail. They recieve an Error 650 (the computer you are dialing in to does not respond to a network request). The ASL logs for these connections are:


Feb 19 14:18:19 asl pppd[14624]: pppd 2.4.0 started by (unknown), uid 0
Feb 19 14:18:19 asl pppd[14624]: using channel 25
Feb 19 14:18:19 asl pppd[14624]: Using interface ppp0
Feb 19 14:18:19 asl pppd[14624]: Connect: ppp0  /dev/ttyp0
Feb 19 14:18:19 asl pppd[14624]: scan_authfile: found IP address 127.0.0.1
Feb 19 14:18:19 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:22 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:23 asl pppd[14624]: rcvd [LCP ConfReq id=0x1   ]
Feb 19 14:18:23 asl pppd[14624]: sent [LCP ConfAck id=0x1   ]
Feb 19 14:18:23 asl pppd[14624]: rcvd [LCP ConfReq id=0x2   ]
Feb 19 14:18:23 asl pppd[14624]: sent [LCP ConfAck id=0x2   ]
Feb 19 14:18:25 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:26 asl pppd[14624]: rcvd [LCP ConfReq id=0x3   ]
Feb 19 14:18:26 asl pppd[14624]: sent [LCP ConfAck id=0x3   ]
Feb 19 14:18:28 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:29 asl pppd[14624]: rcvd [LCP ConfReq id=0x4   ]
Feb 19 14:18:29 asl pppd[14624]: sent [LCP ConfAck id=0x4   ]
Feb 19 14:18:31 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:32 asl pppd[14624]: rcvd [LCP ConfReq id=0x5   ]
Feb 19 14:18:32 asl pppd[14624]: sent [LCP ConfAck id=0x5   ]
Feb 19 14:18:34 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:35 asl pppd[14624]: rcvd [LCP ConfReq id=0x6   ]
Feb 19 14:18:35 asl pppd[14624]: sent [LCP ConfAck id=0x6   ]
Feb 19 14:18:38 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:38 asl pppd[14624]: rcvd [LCP ConfReq id=0x7   ]
Feb 19 14:18:38 asl pppd[14624]: sent [LCP ConfAck id=0x7   ]
Feb 19 14:18:41 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:41 asl pppd[14624]: rcvd [LCP ConfReq id=0x8   ]
Feb 19 14:18:41 asl pppd[14624]: sent [LCP ConfAck id=0x8   ]
Feb 19 14:18:44 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:44 asl pppd[14624]: rcvd [LCP ConfReq id=0x9   ]
Feb 19 14:18:44 asl pppd[14624]: sent [LCP ConfAck id=0x9   ]
Feb 19 14:18:47 asl pppd[14624]: sent [LCP ConfReq id=0x1      ]
Feb 19 14:18:47 asl pppd[14624]: rcvd [LCP ConfReq id=0xa   ]
Feb 19 14:18:47 asl pppd[14624]: sent [LCP ConfAck id=0xa   ]
Feb 19 14:18:50 asl pppd[14624]: LCP: timeout sending Config-Requests 
Feb 19 14:18:50 asl pppd[14624]: Connection terminated.
Feb 19 14:18:50 asl pppd[14624]: Exit.



Please note, for win2000 clients, the negotiations are fine and it connects properly.

Any ideas more than welcome

   


This thread was automatically locked due to age.
Parents Reply Children
No Data