This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN Routes Missing

Here is the output from my VPN status.  It looks to me like the connection it active, but the routes don't exist?  Any ideas?
X,Y, and Z's are public addresses.
000 "Huckabee-Office_1": 10.50.0.0/22===Y.Y.Y.Y---Z.Z.Z.Z...X.X.X.1===X.X.X.0/24
000 "Huckabee-Office_1":   ike_life: 7800s; ipsec_life: 3600s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 0
000 "Huckabee-Office_1":   policy: PSK+ENCRYPT+COMPRESS+TUNNEL+PFS+DISABLEARRIVALCHECK; interface: eth0; unrouted
000 "Huckabee-Office_1":   newest ISAKMP SA: #397; newest IPsec SA: #0; eroute owner: #0
000 "Huckabee-Office_1":   ESP algorithms wanted: 3/000-1/000, 3/000-2/000, 
000 "Huckabee-Office_1":   ESP algorithms loaded: 3/168-1/128, 3/168-2/160, 
000  
000 #552: "Huckabee-Office_1" STATE_QUICK_I1 (sent QI1, expecting QR1); EVENT_RETRANSMIT in 12s
000 #551: "Huckabee-Office_1" STATE_QUICK_R1 (sent QR1, inbound IPsec SA installed, expecting QI2); EVENT_RETRANSMIT in 11s
000 #397: "Huckabee-Office_1" STATE_MAIN_I4 (ISAKMP SA established); EVENT_SA_REPLACE in 1632s; newest ISAKMP
 
 [size="1"][ 15 January 2003, 16:20: Message edited by: preeder ][/size]


This thread was automatically locked due to age.
Parents
  • preeder, 

    are you sure about the setup 10.50.0.0/22===206.66.8.84---206.66.8.1...204.0.58.1===204.0.58.0/24 looks a bit strange to me, remote endpoint 204.0.58.1, remote subnet 204.0.58.0/24 ??? What is the remote endpoint, Astaro? could you post the part of the VPN logfile.

    BTW, I wouldn't post my IPs here (hint hint...)  [;)]
Reply
  • preeder, 

    are you sure about the setup 10.50.0.0/22===206.66.8.84---206.66.8.1...204.0.58.1===204.0.58.0/24 looks a bit strange to me, remote endpoint 204.0.58.1, remote subnet 204.0.58.0/24 ??? What is the remote endpoint, Astaro? could you post the part of the VPN logfile.

    BTW, I wouldn't post my IPs here (hint hint...)  [;)]
Children
  • As I can see in your log, the tunnel is not yet established. The other side isn´t responding. Maybe you may have to review if both local and remote VPN boxes agree about endpoints and optional local and remote subnets in this tunnel setup.

    HTH