Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 1 subscriber
  • Views 1829 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing traffic between two IPSEC tunnels

MSz
Hello,

my problem briefly:

I have to connect two locations with Astaros (A and B) to a third (C) with a Firewall-1 in place. Since one of the Astaros accesses the Internet via a PPPoE connection (A) and hence gets an IP assigned dynamically it can not be connected to the FW-1 directly (FW-1 does not support this). My idea is to create an IPSEC tunnel between A and B using the local subnet of C for the B side. Than I would create a second tunnel between B and C. This time with the local subnet of A for the B side subnet.

My question:
Will the traffic be routed between the tunnels automatically, since both ends are on the same Astaro?
Has anybody set this up successfully?
Any other recommendations how to solve the problem?

Thanks a lot!
Michael


This thread was automatically locked due to age.
  • 0
    i had a similar issue before, but the way i understand it (and other might correct me), this is not possible, you need the additional tunnel, you can't route the way you want. I think that is called a mash setup.