Two interfaces with different networks on UTM

Hi Junseok,

First, see #2 in Rulz (last updated 2021-02-16).

Which remote access method are you using?  If it's the SSL VPN, please show a picture of the Edit of the Profile. If IPsec, the rule.  If L2TP/IPsec or PPTP, the relevant firewall rule(s).

Cheers - Bob

Hi Junseok,

First, see #2 in Rulz (last updated 2021-02-16).

Which remote access method are you using?  If it's the SSL VPN, please show a picture of the Edit of the Profile. If IPsec, the rule.  If L2TP/IPsec or PPTP, the relevant firewall rule(s).

Cheers - Bob

Sorry now I can ping the 40.0 network but not all of them. I need to be able to ping the PBX from VLAN SSL.

When I am connected to VPN, I can ping both 192.168.0.254 and 192.168.40.254. 

I need to ping 192.168.40.100 from VPN but it cannot reach. It only goes to 192.168.40.251. but if i ping from 192.168.40.254 to 192.168.40.210 it works not from VPN nor 192.168.0.254

Interfaces

Firewall Rules

VPN SSL

Network diagram

I recommended consulting #2 in Rulz above.  It includes the following:

3. then the 'ICMP' tab in 'Firewall': Traceroute and Ping are regulated on the 'ICMP' tab.  The "All" service only includes TCP and UDP - none of the other IP protocols are included.

Does that resolve your issue?

Cheers - Bob

Yes the ICMP are enabled.

I really don't know why I cannot ping from VLAN 1 to VLAN 100 IP address if they are configured on the same interface. 

Ping to the PBX and the 40.254

ICMP settings