Guest User!

You are not Sophos Staff.

Thread Info
  • Locked Locked
  • Replies 8 replies
  • Subscribers 6 subscribers
  • Views 31304 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED15 reconfiguring

BjoernStoehr

Hi,

i have little problem in reconfiguring our RED15 device. It is the first RED device we have.

I configured it for testing purposes for my home network. At home i have no DHCP Server, so i configured a static ip like (192.168.179.20/24) and used the "manual per USB". At home plugged in the usb stick and everything works fine. The RED tunnel is up and i can connect to the company site.

Now i want to reconfigure the RED for another location. What i´ve done is to delete the red and configured it again with another static ip. (i used the unlock code which is generated the first time) Downloaded the file and put it on the usb stick. Booted the RED but it can´t reach the router. Hmm, tried another usb stick. Nothing. Took the RED back to my home and there it works again. It would not update the config with the new ip for new location. Ok, then i tried it without an unlock code (only needed when connecting to a new utm?) nothing. It won´t work with a new config file.

I deleted the RED again and made an new config, therefore i got a new unlock code. Which code is now active, because the config is the first config never updated, but in utm i have now the 3rd config?

Now i am a little confused.

Thanks a lot

Bjoern

PS: is there a way to get output from the console port? logging or something?



This thread was automatically locked due to age.
Parents
  • Hi,

    ok, now i have it back in provisioning mode. All works fine now with a dhcp server. Then we changed to static ip for testing purposes. The RED was connected with dhcp, got it´s static ip and after a restart it has used the static ip but won´t got into the internet. The static ip is right. We tried with a laptop. The lights told us that the red reaches the router but not the internet. If we turn on the dhcp server (same ip range, gateway etc.) it connects immediately.
    Hmm, then we tried with our other internet connection. Same here. DHCP ok, but static ip not.
    In wireshark the RED connects to internet servers with static ip but then blocks the rest.
    Any ideas we could do?

    I got no emails when i got replies to my thread...

    Thanks a lot
    Bjoern
Reply
  • Hi,

    ok, now i have it back in provisioning mode. All works fine now with a dhcp server. Then we changed to static ip for testing purposes. The RED was connected with dhcp, got it´s static ip and after a restart it has used the static ip but won´t got into the internet. The static ip is right. We tried with a laptop. The lights told us that the red reaches the router but not the internet. If we turn on the dhcp server (same ip range, gateway etc.) it connects immediately.
    Hmm, then we tried with our other internet connection. Same here. DHCP ok, but static ip not.
    In wireshark the RED connects to internet servers with static ip but then blocks the rest.
    Any ideas we could do?

    I got no emails when i got replies to my thread...

    Thanks a lot
    Bjoern
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?