Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 2 answers
  • Subscribers 4 subscribers
  • Views 15106 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Howto configure CCTV in dmz with webserver protection?

Marco Alunni Pini

Hi everybody

 

i've utm 9 with webserver protection active. Ive a VCR CCTV with different address from the local lan.

My lan is in: 10.1.1.x

My dmz is in: 192.168.1.x

My wan1 has a public ip same the wan2 (eth4).

Now i've pubblished the vcr web site externally and i can login with the webserver protection. Firewall has WAN2->CCTV network open same the other direction (CCTV->WAN2).

Also i've got a masq on CCTV subnet to wan2.

My problem is that i cannot see the streaming from the webcams. What can i do? Firewall doesnt block nothing but no streaming.

Someone can help me?



This thread was automatically locked due to age.
Parents
  • 0

    Device is probably switching to an alternate port, which waf will not allow.   Check using wireshark or web proxy logging from an internal pc to confirm.

    If it uses a plugin that invokes a custom protocol like httx://, waf will block that as well.

    Worksround is firewall rules instead of waf, or logging into an internal device using vpn or equivalent, then running tbe app internally.

Reply
  • 0

    Device is probably switching to an alternate port, which waf will not allow.   Check using wireshark or web proxy logging from an internal pc to confirm.

    If it uses a plugin that invokes a custom protocol like httx://, waf will block that as well.

    Worksround is firewall rules instead of waf, or logging into an internal device using vpn or equivalent, then running tbe app internally.

Children
No Data
Unfiltered HTML