Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VoIP (Network Protection) & SIP - 2 networks

We have 2 different organisations who both use Cisco UCM's. We have sip trunks set up between us (leased line) for internal dialing. It works.

I'm looking at the Network Protection menu (VoIP) and wondering if I should use this instead? And how would we use it? Is there any advantage?

ORGANISATION A (Cisco ASA)
CUCM 1, 2, 3 & 4 (10.3.1.1-4)
Voice Networks A (10.3.0.0/16)

ORGANISATION B (Sophos UTM)
CUCM 5, 6, 7 & 8 (10.10.0.1.1-4)
Voice networks B (10.10.0.0/16)

We allow:

B > ANY > A (A sets the firewall rules for incoming traffic) eg only allow SIP from CUCM 5,6,7,8 to CUCM 1,2,3,4 & RTP from Voice Networks B > Voice networks A
A > ANY > B (B sets the firewall rules for incoming traffic) eg only allow SIP from CUCM 1,2,3,4 to CUCM 5,6,7,8 & RTP from Voice Networks A > Voice networks B



This thread was automatically locked due to age.
  • If you'd known about that beforehand, Louis, you might have had less work to do in WebAdmin, but I don't know of any advantage to changing a working configuration!

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Yep. Was sort of under pressure to get it up and running.

    I'm just wondering if there is any unseen advantage to it being applied? I'm not sure if there would be in this case as our phones connect to our SIP server which is internal.

    All there is here is a series of sip trunks between SIP Servers on each network. Phones & devices purely connect to the local organisations sip server (for sip signalling) and voice vlans to voice vlans for rtp.

Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?