Port Forwarding Problem

The settings look good. Is the destination address of the firewall screenshot the WAN or LAN address?

First please check, if the DNAT rule is enabled. I mean new rules are disabled in standard, but I'm not sure.

Then you should check and post the firewall rule. You can view them by selecting "Automatic Firewall rules" in the firewall settings.

If everything looks fine, you should try to create a firewall rule by your own, and not automatically by the DNAT rule.

Thanks Jas Man!

I created the firewall rule and unchecked "Automatic firewalls Rules" but the result is the same.

Do you have any suggestion?

You choose the object "My internal IP" as destination object in the DNAT rule.

Go to "Definitions & Users" -> "Network Definitions" -> Tab "Network Definitions". Search for the "My internal IP" object and check if the interface is correct.

Hi,

are you sure, the NAT rule is activated? 

The log shows a default drop. So the NAT rule does not work. Also, is the service (RDP) really set to port 3389 TCP?

Hi, Cuong, and welcome to the UTM Community!

Check #3, #4 and #5 in Rulz - any luck with that?

Cheers - Bob

Hi ManuelAbeledo!

All setting that you show is correct but it's not working!

Thanks Jas Man but it's still not working

within "Going To: WAN" do you really use the "WAN interface Address"?

Yes,

I have two WANs so i select one of them!

i think your "WAN" definition is not correct.

can you show me a screenshot from NAT-Rule ... please

something like this:

The Address from selected WAN-Interface is the address used by RDP-Client?

OK 

Here is My NAT & Firewall Rule

Firewall Rule 

NAT

NET-01 is WAN connection

The manuel firewall rule is still active? Otherwise activate "Automatic Firewall rule" again. -> EDIT: Didn't saw the second screenshot. Please ignore.

And you could try to remove RDP as "Destination Translation" because there is nothing to translate. Normaly this should not harm DNAT, but maybe....

The manuel firewall rule is still active? Otherwise activate "Automatic Firewall rule" again. -> EDIT: Didn't saw the second screenshot. Please ignore.

And you could try to remove RDP as "Destination Translation" because there is nothing to translate. Normaly this should not harm DNAT, but maybe....

I was try but it is still not working