Have some challenges in getting portforwarding to be working on my Sophos UTM 9.3
Firmware version: 9315-2
Pattern version: 87583
On the LAN side, I have a Mumble Server to be accessed from outside WAN.
Mumble Server has the following IP: 192.168.1.5, the port number is 9090.
Mumble use TCP/UDP.
What I have tried, in ”Definitions & Users” -> “Network Definitions” add the IP of the mumble server, see picture below.
And then in ”Service Definitions” add the Service/port number see picture below.
I have made a new Nat rule in ”Network Protection”
rule type: DNAT (Destination)
Matching Condition:
For traffic from: Any, Matches any IPv4 and IPv6 address 0.0.0.0/0
Using service: Mumble (1:65535->9090)
Going to: External (WAN) (Address)
Action:
Change the destination to: SilentOne (192.168.1.5)
And the service to: empty
Automatic firewall rule: checked
Firewall rule is not automatically created although there is checked create firewall rule automatically, I have to manually create the firewall rule.
The two last pictures is added as attachments, se below.
I have also tried to disable:
Advanced Threat Protection
Intrusion Prevention
Web Protection
But stil the same, firewall is dropping the connection, any idea of what could be wrong?
Any help is much appreciated.
I have tried to follow this guide, https://drashna.net/blog/2014/03/port-forwarding-with-sophos/
But it stil does not work, Sophos drops the connection, if I look at the live log of the firewall.
This thread was automatically locked due to age.
