This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

firewall not working

hi, i use sophos utm 9.313-3 at home with currently 32 IP's.

even if i disable all fw rules i have still access to the internet. [[:(]]
it is blocking by default, isnt it?

i also added as rule on top: any>any>any>drop = no effect. [[:(]]

someone has a idea?

thanks in advance!


This thread was automatically locked due to age.
Parents
  • hi, thanks for replaying!

    i restored an old config already, which was active after the installation
    with just one internal, one external and the standard rules.
    the problem was not solved.

    here my config:

    sophos is the internet gateway. there are 4 gbit interfaces:
    external -> Fiber Optic Modem
    internal -> cisco300-10 layer2 mode, with vlan1 and vlan199 (2 dhcp-range on sophos)
    internal2 -> voip(fritzbox)
    2nd admin -> no permanent connection

    there is also a ipsec vpn to my family in the next town.
    disabling it had no effect.

    [Status: Enabled]  Firewall is active with 10 rules
    [Status: Enabled]  Intrusion Prevention is active with 1880 of 23874 patterns
    [Status: Enabled]  Web Filtering is active, 11450 requests served today
    [Status: Disabled]  Network Visibility is inactive
    [Status: Enabled]  SMTP Proxy is active, 0 emails processed, 0 emails blocked
    [Status: Enabled]  POP3 Proxy is active, 0 emails processed, 0 emails blocked
    [Status: Disabled]  RED is inactive
    [Status: Disabled]  Wireless Protection is inactive
    [Status: Disabled]  Endpoint Protection is inactive
    [Status: Enabled]  Site-to-Site VPN is active with 1 of 1 tunnels
    [Status: Disabled]  Remote Access is inactive
    [Status: Disabled]  Web Application Firewall is inactive
    [Status: Disabled]  Sophos UTM Manager is not configured
    [Status: Disabled]  Sophos Mobile Control is inactive
    [Status: Disabled]  HA/Cluster is inactive
    [Status: Enabled]  Antivirus is active for protocols HTTP/S, SMTP, POP3
    [Status: Enabled]  AntiSpam is active for protocols SMTP, POP3
    [Status: Enabled]  AntiSpyware is active
Reply
  • hi, thanks for replaying!

    i restored an old config already, which was active after the installation
    with just one internal, one external and the standard rules.
    the problem was not solved.

    here my config:

    sophos is the internet gateway. there are 4 gbit interfaces:
    external -> Fiber Optic Modem
    internal -> cisco300-10 layer2 mode, with vlan1 and vlan199 (2 dhcp-range on sophos)
    internal2 -> voip(fritzbox)
    2nd admin -> no permanent connection

    there is also a ipsec vpn to my family in the next town.
    disabling it had no effect.

    [Status: Enabled]  Firewall is active with 10 rules
    [Status: Enabled]  Intrusion Prevention is active with 1880 of 23874 patterns
    [Status: Enabled]  Web Filtering is active, 11450 requests served today
    [Status: Disabled]  Network Visibility is inactive
    [Status: Enabled]  SMTP Proxy is active, 0 emails processed, 0 emails blocked
    [Status: Enabled]  POP3 Proxy is active, 0 emails processed, 0 emails blocked
    [Status: Disabled]  RED is inactive
    [Status: Disabled]  Wireless Protection is inactive
    [Status: Disabled]  Endpoint Protection is inactive
    [Status: Enabled]  Site-to-Site VPN is active with 1 of 1 tunnels
    [Status: Disabled]  Remote Access is inactive
    [Status: Disabled]  Web Application Firewall is inactive
    [Status: Disabled]  Sophos UTM Manager is not configured
    [Status: Disabled]  Sophos Mobile Control is inactive
    [Status: Disabled]  HA/Cluster is inactive
    [Status: Enabled]  Antivirus is active for protocols HTTP/S, SMTP, POP3
    [Status: Enabled]  AntiSpam is active for protocols SMTP, POP3
    [Status: Enabled]  AntiSpyware is active
Children
No Data