Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 2 subscribers
  • Views 2751 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No IPv6 Connectivity, regardless getting a IPv6 Address

solae
Hi

I'm running a Software Appliance with 9.312-8 at Home. I should receive a IPv6 address from my Provider.

In the Logfiles i think i can see that the UTM ist getting an IPv6 Address, but the Connectivity under "Interface --> IPv6" shows "NONE" 


2015:06:17-22:36:51 fw01-sg-1 ipv6_watchdog[16062]: Starting IPv6 address watchdog

2015:06:17-22:36:53 fw01-sg-1 ipv6_watchdog[16062]: Start of monitoring interface eth4 (6)

2015:06:17-22:36:53 fw01-sg-1 ipv6_watchdog[16062]: Installing default route via fe80::20e[:D]6ff:fe89:fc00 (6)

2015:06:17-22:36:53 fw01-sg-1 ipv6_watchdog[16062]: Interface eth4 (6) changed RA flags: NONE -> SENT,RCVD,READY

2015:06:17-22:36:54 fw01-sg-1 ipv6_watchdog[16062]: Installing address 2a02:168:2000:22:20c:29ff:fe8d:e9a0/64 (6)


Is this some kind of Bug?


This thread was automatically locked due to age.
Parents
  • 0
    Hi Ian

    I do not use a Modem, because i get a Fiber Connection from my ISP and connect it with a SFP Modul to my Switch.


    Hi Ben, Thanks for your advise i will write back to you as far as possible [:)]
Reply
  • 0
    Hi Ian

    I do not use a Modem, because i get a Fiber Connection from my ISP and connect it with a SFP Modul to my Switch.


    Hi Ben, Thanks for your advise i will write back to you as far as possible [:)]
Children
No Data