Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 10222 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WDMyCloud and Port Forward

mozerd
I have a WD MyCloud NAS that sits internally. To enable Access to the NAs from the Cloud I need to use port 80 and port 443. I have configured alternate ports on the WDMyCloud NAS to 9980 and 9443 --- so when an External call to the NAS is made at 9980 the firewall has to redirect the packet to port 80 and when 9443 is used the firewall has to redirect the packet to port 443.

So I created 2 DNAT rules as depicted:

Problem is that no redirection is taking place .... please advise. thank You


This thread was automatically locked due to age.
Parents
  • 0
    Your DNATs are all kinds of messed up for Matching Condition.  [:)]

    Matching Condition
    For traffic from: Internet IPv4
    Using service: WD_9980
    Going to: WAN (Address)

    Action
    Change the destination to: WDMyCloud
    And the service to:  HTTP


    Same for WD_9443

    Make certain you are testing this from "The Cloud" and if you tick "Log initial packets" under Advanced, you'll be able to see the NAT rules being hit in the Firewall Log.
  • 0 in reply to Scott_Klassen
    Thank you Scott, your suggestion worked.

    I need to get my SOPHOS UTM 9 object oriented bearings straitened out ... [:)]
Reply Children
No Data