Hello,
Trying to wrap my head around a small issue that has me stumped, I am setting up a new UTM for a customer coming from a Sonicwall. The sonicwall has 7 NIC ports of which 4 of them have been setup each with unique HOST lan addresses , i.e 192.168.1.1, 10.0.1.1, 192.168.5.1 etc... They all act like independant LANs with all traffic going out to a single WAN gateway. So I have my UTM with 5 NIC ports and I have set them up with the same addresses under interface and routing 10.0.1.1/24 etc... I have gone over to the additional addresses section and created an additional interface address connecting the NIC port interface 10.0.1.1 to a seperate WAN IP in the block with a netmask of 32. Now from here I get stumped as when I log onto the server that is directly connected to this NIC port on the UTM I can ping the NIC port IP i.e 10.0.1.1 and I can even ping the UTM default LAN interface address, but I cannot get out to the internet at all, I have a NAT rule created to allow RDP to this server through the secondary WAN address and it works flawless. I have tried DNAT rules, I have tried a static route, a gateway route,etc... I am now just guessing and I cannot figure out how to get internet on these 5 independant NIC ports. Any ideas I would greatly appreciate it.[:S]
Thank you
Don
This thread was automatically locked due to age.
