Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 2 subscribers
  • Views 11568 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with DNAT & DVR

Lonerboi
I am setting up my DVR to be accessible from WAN, via port forwarding

I have done the following,
1)create a cctv interface
2)give it a dhcp server
3)allow it to access dns
4)define my DVR to a static ip
5)firewall rule is any>any>any
6)masquerade CCTV(network)>WAN
7)NAT DNAT any>cctv port>wan
translate to DVR
automatic firewall rule
initial packets are logged

However when i type in my http://WAN:cctv port, I am not being redirected to my DVR webpage. Anything I missed out?


This thread was automatically locked due to age.
Parents
  • 0
    DNAT looks ok, but generally better to use Internet IPv4 instead of Any.  Please edit your custom service definition and post a screenshot of that.  In a service definition the source port should remain the default 1:65535, only the destination port should be changed.
Reply
  • 0
    DNAT looks ok, but generally better to use Internet IPv4 instead of Any.  Please edit your custom service definition and post a screenshot of that.  In a service definition the source port should remain the default 1:65535, only the destination port should be changed.
Children
No Data