Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 2 subscribers
  • Views 11568 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with DNAT & DVR

Lonerboi
I am setting up my DVR to be accessible from WAN, via port forwarding

I have done the following,
1)create a cctv interface
2)give it a dhcp server
3)allow it to access dns
4)define my DVR to a static ip
5)firewall rule is any>any>any
6)masquerade CCTV(network)>WAN
7)NAT DNAT any>cctv port>wan
translate to DVR
automatic firewall rule
initial packets are logged

However when i type in my http://WAN:cctv port, I am not being redirected to my DVR webpage. Anything I missed out?


This thread was automatically locked due to age.
Parents
  • 0
    5)firewall rule is any>any>any
    Uuummm, this is bad.

    7)NAT DNAT any>cctv port>wan
    Attach screenshots with the details of the DNAT and the custom service definition you created.  Many people do these wrong initially.

    when i type in my http://WAN:cctv port
    You are testing this from outside your network (over the internet), correct?  You can't connect to your own WAN IP from internal networks with UTM, without further configuration changes.
Reply
  • 0
    5)firewall rule is any>any>any
    Uuummm, this is bad.

    7)NAT DNAT any>cctv port>wan
    Attach screenshots with the details of the DNAT and the custom service definition you created.  Many people do these wrong initially.

    when i type in my http://WAN:cctv port
    You are testing this from outside your network (over the internet), correct?  You can't connect to your own WAN IP from internal networks with UTM, without further configuration changes.
Children
No Data