Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 2 subscribers
  • Views 2562 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

problem with two utm

farokh49
hi
i have sg310 for gateway firewall.Now i want use one utm (Netasq) front server farm in Layer 2. when i ping my server from sg310 there is no problem but when i ping servers from my Lan ( computer's) i cann't no ping. my servers are behind Netasq and my Lan Computer are behind SG310.


This thread was automatically locked due to age.
Parents
  • 0
    You do realize that sophos can protect BOTH and keep them separate so you only have to configure one firewall?  

    you need to figure out what ports you need to route between the firewalls then you will need to setup a dnat or snat on the sophos to forward the required traffic through to whatever device you want it to go through.  you will have to do similar configuration on the other utm.
Reply
  • 0
    You do realize that sophos can protect BOTH and keep them separate so you only have to configure one firewall?  

    you need to figure out what ports you need to route between the firewalls then you will need to setup a dnat or snat on the sophos to forward the required traffic through to whatever device you want it to go through.  you will have to do similar configuration on the other utm.
Children
No Data