Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 3 subscribers
  • Views 17704 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

statuscode="504" when attempting to reach one website

4ndrew
Sophos UTM9
Model:  ASG120 
Serial:  A170613AD6813B7 
Firmware version:  9.209-8 
Pattern version:  69778 

Hello,

When users inside our office try to go to www.murphymckay.com they are unable to reach the website.  This is our company website that is hosted on a 3rd party server.  I can reach this website from outside of our network.  I plugged a laptop directly into the ISP's cable modem, bypassing the Sophos, and I can reach the website.  Our firmware was a bit old so I updated the firmware and restarted the firewall.  I also unplugged the power cord for 30 seconds.  When computers try to do a nslookup for www.murphymckay.com they get the correct ip.  The Sophos also shows the correct ip when I go to tools and do a dns lookup.

The issue persists.  I also tried a few more things:
- went to web protection > web filtering > policy test > www.murphymckay.com and it says result = allowed

- turned off application control.  still unable to access website

- turned off web filtering.  Still can not access www.murphymckay.com
I have uploaded the screenshot of the error message that end users see.  The message says,

"An error occurred while handling your request.  While trying to retrieve the url: www.murphymckay.com the content could not be delivered due to the following condition: Connection to server timed out.  Your cache administrator: is administrator@murphymckay.com"

When I look at the web filtering log in the utm, I see this:

2014:11:06-10:36:04 sophosfirewall httpproxy[2034]: id="0002" severity="info" sys="SecureWeb" sub="http" name="web request blocked" action="block" method="GET" srcip="172.16.8.98" dstip="72.249.159.196" user="" statuscode="504" cached="0" profile="REF_DefaultHTTPProfile (Default Web Filter Profile)" filteraction="REF_DefaultHTTPCFFAction (Default content filter action)" size="2530" request="0xe6d7760" url="www.murphymckay.com/favicon.ico" exceptions="av,auth,mime,cache,fileextension,size" error="Connection to server timed out" authtime="0" dnstime="307" cattime="30380" avscantime="0" fullreqtime="60946574" device="0" auth="0" category="105" reputation="neutral" categoryname="Business" application="http" 

Does anyone know why this is happening just for this one website?  If anyone has any good steps to further troubleshoot this, I would appreciate it.

Andrew


This thread was automatically locked due to age.
Parents
  • 0
    Andrew, I answered the same question on Kautilya's thread.

    As to "why" this happens, I would like to know how to figure it out with using a packet capture.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    Hi Bob,

    I was able to resolve the issue, thanks to your answer.  I had to make one extra step.

    I went to UTM > web protection > filtering options > Misc tab > transparent mode skiplist > skip transparent mode destination hosts/nets
    I added an entry for the website

    This did not immediately fix my problem.  I had to go and remove an exception that I had earlier put in for troubleshooting.  (This was in the exception tab.  I had previously made an exception list so that the website would not be subject to antivirus other content checks).

    Once I added the transparent mode skiplist and removed my previous troubleshooting exception, my problem was fixed and I can access the website.

    I consider this issue resolved.  Thanks again for your help.

    Andrew
  • 0 in reply to 4ndrew

    Hi Guys,

     

    I have a similar problem with the website http://bluefishoffice.co.uk

     

    I've tried with the skip transparent mode destination setting.

    Then I've tried with the exception list

    Then I've added the site to the trusted websites

    When I test the policy from Web Filter Profiles -> test policy it says allowed but the user still gets this connection timeout error.

    Who can help me?

  • 0 in reply to Mike185

    Hi, Mike, and welcome to the UTM Community!

    Please show a representative line from the Web Filtering log, a picture of the Edit of the unsuccessful Exception and a picture of the Skip Transparent Mode setting.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi,

     

    All is working now...I just have the transparent and exaction rules configured and without any further changes all of a sudden it started working.

     

    Same when it stopped working we din't do any special changes...it just stopped working

     

Reply
  • 0 in reply to BAlfson

    Hi,

     

    All is working now...I just have the transparent and exaction rules configured and without any further changes all of a sudden it started working.

     

    Same when it stopped working we din't do any special changes...it just stopped working

     

Children
No Data
Unfiltered HTML