This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Traffic between 2 interfaces

I have added a dmz to my network using a separate interface.
Both networks are able to go to the internet.
The internal network can ping/communicate with the dmz but the dmz is unable to initiate traffic to the internal network(pings fail)
I have rules allowing both networks to use any service going anywhere.

From the DMZ I can ping the gateway of the internal network but nothing else.
Routing is suppose to be automatic, what am I missing?

This thread was automatically locked due to age.

Parents

0 BAlfson over 10 years ago

Hi, dhartley, and welcome to the User BB!

Pinging is regulated on the 'ICMP' tab in 'Firewall'. "Any" does not include ICMP. Any luck with that?

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 dhartley over 10 years ago in reply to BAlfson

I am using ping as primary test but I can't map drives use Remote desktop etc.. I also changed the settings on the firewall to allow the pings while testing.

I also agree I shouldn't need to use masq rule since this traffic shouldn't be going outside.

I can still ping the firewall interface for the unreachable zone which is odd since I can't ping anything else in that zone.
it seems like it knows where to go.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 dhartley over 10 years ago in reply to BAlfson

I am using ping as primary test but I can't map drives use Remote desktop etc.. I also changed the settings on the firewall to allow the pings while testing.

I also agree I shouldn't need to use masq rule since this traffic shouldn't be going outside.

I can still ping the firewall interface for the unreachable zone which is odd since I can't ping anything else in that zone.
it seems like it knows where to go.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data