Hello Need help port forwarding server2012r2 ssl vpn and cctv ip camera & rdp
to go through firewall and where I can access them all remotely.
Please explain how to do all of this.
Sorry for the late reply, but here's an example of a DNAT rule I have in use.
At going to I have an External WAN (Address) object.
I'm using SSH for this example, but you should use the port(s) for SSL VPN. I'm not sure which these are, but it shouldn't be too hard to find the right port(s).
Sorry for the late reply, but here's an example of a DNAT rule I have in use.
At going to I have an External WAN (Address) object.
I'm using SSH for this example, but you should use the port(s) for SSL VPN. I'm not sure which these are, but it shouldn't be too hard to find the right port(s).
Don't use 2 separate SSL-VPN's. It's not possible that both operate at the same port. You can change port (or protocol) for one of them, but you will still have to manage and maintain both. Stick to just 1 and my advise is to use Sophos UTM for SSL remote access. Set this up using UDP (and not TCP) because it will be faster.
For DNAT you should always use the External (Address) object for traffic going to, since it's traffic arriving at your external interface and from there on it has to be forwarded to your internal server.
Sorry for the late reply, but here's an example of a DNAT rule I have in use.
At going to I have an External WAN (Address) object.
I'm using SSH for this example, but you should use the port(s) for SSL VPN. I'm not sure which these are, but it shouldn't be too hard to find the right port(s).
Ok, thanks for the screenshot here is the ports directly from microsoft Configure a Firewall for VPN Traffic and also from a blog that tells you also: Setup a Windows Server 2012 VPN : Page 2 of 3 : Sysads Gazette so it only requires port 443 to be forwarded to the 2012r2 vpn server for ssl vpn to work(sstp) so please help me with configuring this.
Here is a screenshot of my config if it will help:
[ATTACH]12409[/ATTACH]
