Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 4065 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QoS: Limit bandwidth usage for guest network

IngoPohlschneider
Hello
I would like to implement bandwidth limitations for my guest networks (LAN and WLAN).

The networks are two VLANs assigned to a physical interface on my UTM.

I tried the following:

QoS>Traffic Selector:    Network Group "Guest-networks" > Any > Any
QoS>Download Throttling: On each WAN-Link:   Limit 32000 with ^-Traffic Selector

Did not work

The I enabled QoS>Status for the two VLAN-Interfaces and limited the available bandwidth there to 32000.

This works

Is this the suggested way to do it?
Why did the first attempt not work (it would of course only limit download)?

This is ok for the guest networks since they only do WAN-access anyway, but on some LANs I'd like to limit the WAN-speed for certain Apps/Destinations as well without limiting the overall available  bandwidth

Best regards
chas0rde


This thread was automatically locked due to age.
Parents
  • 0
    can you try it without using a group, so you get 1 selector per VLAN,
    maybe it doesn't work properly with those groups

    also, I am not using the download throttling.. that other tab works though(can't recall name)
    I got:
    QoS>Traffic Selector: Internal > Any > Any
    QoS>Traffic Selector: Any > Any > Internal

    and then 2 bandwith pools, both capped at 1024 KBit/s, 1 for both selector on the correct interface, and it seems to work pretty good
  • 0 in reply to FrankBarmentlo
    Setting it to single network did not solve the issue

    I do not want to use bandwidth pools since i have to reserve a minimum (even if it is just one KB [:P])
Reply Children
No Data