Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 2 subscribers
  • Views 5858 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Phone QOS

NewImage
Hi
I have an Asterisk PBX on its own network with some Polycom phones. This network shares its bandwidth with the LAN over a 100mbit/10mbit cable line Provided by Road Runner/Brighthouse. The phone trucks are provided by bandwidth.com

I have tried following the instructions laid out here for QOS settings.
https://community.sophos.com/products/unified-threat-management/astaroorg/f/54/t/41320

But I continue to have packets lost and choppy phone calls.

I have checked the IPS logs and don't see any flood triggers going off. The only thing that kind of helps is throttling all my other bandwidth down to almost nothing.

Attached is my QOS set up. I don't have any TOS/DSCP set.

Sophos 320
Firmware: 9.111-7

Anything that pops out as not set correctly? 
Any help would be great, thank you.


This thread was automatically locked due to age.
Parents
  • 0
    set the interface to 103 not 80? 

    Yes.

    If the problem isn't your VoIP provider's local equipment on your premises, then I suspect it's the cable connection that's iffy at times.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    set the interface to 103 not 80? 

    Yes.

    If the problem isn't your VoIP provider's local equipment on your premises, then I suspect it's the cable connection that's iffy at times.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Cookie Information Banner