This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Phone QOS

Hi
I have an Asterisk PBX on its own network with some Polycom phones. This network shares its bandwidth with the LAN over a 100mbit/10mbit cable line Provided by Road Runner/Brighthouse. The phone trucks are provided by bandwidth.com

I have tried following the instructions laid out here for QOS settings.
https://community.sophos.com/products/unified-threat-management/astaroorg/f/54/t/41320

But I continue to have packets lost and choppy phone calls.

I have checked the IPS logs and don't see any flood triggers going off. The only thing that kind of helps is throttling all my other bandwidth down to almost nothing.

Attached is my QOS set up. I don't have any TOS/DSCP set.

Sophos 320
Firmware: 9.111-7

Anything that pops out as not set correctly? 
Any help would be great, thank you.


This thread was automatically locked due to age.
Parents
  • yes, I believe so, under my attachment Capture-1.PNG shows what I have set up.
    I have 100mbit/s set on all internal connections at 90 for the external. 

    I never get a full 100mbit unless I plug directly into the cable modem. Not sure where the bottle neck is. Should I adjust my external speed to match real world speeds with IPS turned on? That limits my DL speed to about 60mbit, even less with web protection on.
Reply
  • yes, I believe so, under my attachment Capture-1.PNG shows what I have set up.
    I have 100mbit/s set on all internal connections at 90 for the external. 

    I never get a full 100mbit unless I plug directly into the cable modem. Not sure where the bottle neck is. Should I adjust my external speed to match real world speeds with IPS turned on? That limits my DL speed to about 60mbit, even less with web protection on.
Children
No Data