This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Phone QOS

Hi
I have an Asterisk PBX on its own network with some Polycom phones. This network shares its bandwidth with the LAN over a 100mbit/10mbit cable line Provided by Road Runner/Brighthouse. The phone trucks are provided by bandwidth.com

I have tried following the instructions laid out here for QOS settings.
https://community.sophos.com/products/unified-threat-management/astaroorg/f/54/t/41320

But I continue to have packets lost and choppy phone calls.

I have checked the IPS logs and don't see any flood triggers going off. The only thing that kind of helps is throttling all my other bandwidth down to almost nothing.

Attached is my QOS set up. I don't have any TOS/DSCP set.

Sophos 320
Firmware: 9.111-7

Anything that pops out as not set correctly? 
Any help would be great, thank you.


This thread was automatically locked due to age.
Parents
  • I tested from the LAN, and it is being throttled as it should, I have not tried from the phone network to see if its unlimited.  But to get some what usable phones, I need to permanently throttle internet traffic down to 1 or 2 MB/s.

    We occasionally have high bandwidth between sub-nets like from the LAN to the DMZ hitting the IPS. Could this be overloading the CPU causing hiccups on the phone network? Guess I could try throttling each network.
Reply
  • I tested from the LAN, and it is being throttled as it should, I have not tried from the phone network to see if its unlimited.  But to get some what usable phones, I need to permanently throttle internet traffic down to 1 or 2 MB/s.

    We occasionally have high bandwidth between sub-nets like from the LAN to the DMZ hitting the IPS. Could this be overloading the CPU causing hiccups on the phone network? Guess I could try throttling each network.
Children
No Data