This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Inter-Vlan Routing Sophos UTM

Hi,

I've currently setup Sophos UTM using the home license to allow SSL VPN connections for a few colleagues I work with. It operates as my main router with eth0 connected to a modem and eth1 connected to a switch into my internal network.  I have the device connected to a Dell PowerConnect 2724 switch where I have configured a few Vlans.  This allows me to segment the voip traffic along with my asterisk pbx on Vlan One and my internal network with printer and access point on vlan two.  

I wanted to know if it was possible to configure inter-vlan routing using the Sophos UTM by configuring specific firewall rules.  Any help is greatly appreciated and let me know if I need to include a few more details.


This thread was automatically locked due to age.
Parents
  • The phone is blocked because I've separated it into a different vlan within the switch from the pbx server that its needs to register with.  The voip proxy is configured with the pbx, however the pbx is a local/internal ip on a separate vlan.  

    Is it possible to configure the Sophos UTM to route traffic from one vlan within a switch and direct it to another vlan on the same switch?
Reply
  • The phone is blocked because I've separated it into a different vlan within the switch from the pbx server that its needs to register with.  The voip proxy is configured with the pbx, however the pbx is a local/internal ip on a separate vlan.  

    Is it possible to configure the Sophos UTM to route traffic from one vlan within a switch and direct it to another vlan on the same switch?
Children
No Data