This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help Connecting Two Different IP Block

Scenario

I have two IP Block which is 10.100.10.0/24 and 10.100.20.0/24 i want to connect them and share files and Folder.

Where should i start ?
here is my config
Eth1 = 1.1.1.1 (sample ISP IP)
Eth2 = 10.100.10.0/24
Eth3 = 10.100.20.0/24

Thanks in advance for your Help !

This thread was automatically locked due to age.

Parents

0 scorpionking over 12 years ago
Create 2 firewall rules allowing CIFS (or whatever service you are using), DNS and possibly NetBIOS between eth2 (Network) and eth3 (Network) and vice versa.
If it doesn't work, have a look at the firewall log for blocked packets between these networks.
Also check the IPS log for troubleshooting.
----------
Sophos user, admin and reseller.
Private Setup:

XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)

UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 scorpionking over 12 years ago
Create 2 firewall rules allowing CIFS (or whatever service you are using), DNS and possibly NetBIOS between eth2 (Network) and eth3 (Network) and vice versa.
If it doesn't work, have a look at the firewall log for blocked packets between these networks.
Also check the IPS log for troubleshooting.
----------
Sophos user, admin and reseller.
Private Setup:

XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)

UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data