Dear board,
I’ve search different times but I don’t find a solution.
I want to separate different subnets over the UTM
My workbench:
Eth.1: IP 10.0.200.230 Network 10.0.200.0/24 Gateway 10.0.200.1
Network 10.0.3.0/24 cisco Gateway extern 10.0.3.1
10.0.4.0/24 cisco Gateway extern Gateway extern 10.0.3.1
10.0.5.0/24 cisco Gateway extern 10.0.5.1
10.1.100.0/24 cisco Gateway extern 10.1.100.1
these subnets are all connected with my external interface.
Eth.0: IP 10.4.10.1 no Gateway Network Internal1: 10.4.10.0/24
Eth.2: IP 10.4.20.1 no Gateway Network Internal2: 10.4.20.0/24
Eth.3: IP 10.4.30.1 no Gateway Network Internal3: 10.4.30.0/24
Now I want access from 10.0.5.0 to 10.4.10.0
I add a static route 10.0.5.0/24 to internal 10.0.4.0/24
And I add a firewall rule 10.0.5.0/24 any protocol to internal 10.0.4.0/24 with logging and nothing happens.
NAT is disabled because it is all one lan and at some servers I want to see the right IP.
No Log entry for access or deny from 10.0.5.0/24, no access.
I hope I could describe what I want to do and how my network looks like.
If you have any ideas it would be great!
Regards
micmoon
This thread was automatically locked due to age.
