This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Moving from DNATs and SNATs to a 1-1 NAT setup

Hi,

I have a /24 public network routed to our HP DL360G5 running Astaro 7.5x.

Due to company policy, we're using a /24 RFC1918 network inside (e.g. 10.1.1.0/24), and there are now about 40 internal IPs.

This is quite a pain to manage the following:
a. 'additional' external addresses
b. DNATs
c. SNATs

My understanding is that 9.x has a 1 to 1 NAT system, although I do not have a network I can fully test it on, so I have some questions...

1. Can I convert my existing configuration?
I plan to use a spare HP server, install 9.x, import my 7.x config, and am hoping I can delete all the NATs and add a 1-1 NAT.

2. Do I still need all of the 'additional addresses' on the external NIC, or does the 1-1 NAT take care of this somehow?

If converting the existing configuration is not feasible, then I will probably want to try to setup SUM to pull in all my network & service definitions, so I can push them to a new firewall quickly.
Any foreseeable problems with that?

Thank you,
Barry


This thread was automatically locked due to age.
Parents
  • Barry, the more I think about it, the more it seems like your idea should work.  Even if you do wind up doing it like Drew says, it would be interesting to know if you can use any of the IPs with a /24 Additional Address. 

    Cheers - Bob

    Sorry for any short responses.  Posted from my iPhone.
Reply
  • Barry, the more I think about it, the more it seems like your idea should work.  Even if you do wind up doing it like Drew says, it would be interesting to know if you can use any of the IPs with a /24 Additional Address. 

    Cheers - Bob

    Sorry for any short responses.  Posted from my iPhone.
Children
No Data