Hi Folks,
i try to use a UTM 9.0.0.5 to connect two local Networks.
eth0 192.168.0.180/24
eth2 192.168.241.180/24
under Network protection -> Firewall -> icmp
all possibilities are active
i can ping from the eth2 Network only to the eth0 Interface, and not through the utm to the eth0 Network.
the other direction works fine, from the eth0 Network i can reach the whole eth2 Network.
i have no Firewall rules at the Moment.
i read a few threats here at the board and one meaning was, that it is enough to active the icmp rules to reach both Networks with ping (for first step).
Maybe the meaning i found is wrong or i missed something.
so thanks very much for some help.
harold
This thread was automatically locked due to age.
