This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port Forwarding for RTSP Stream

Hello,

I have read through and followed the suggestions on other posts regarding port forwarding (NAT) within UTM 9 however, I cannot seem to get things to work.

I have three internal cameras with which I need to allow external access to their RTSP streams. The internal url for these feeds are as follows:

rtsp://192.168.1.30:554/11
rtsp://192.168.1.28:554/11
rtsp://192.168.1.32:554/11

Using my single external IP address, I will need to specify a different port and then forward for each camera such as:

rtsp://200.13.12.42:2007 => rtsp://192.168.1.30:554/11
rtsp://200.13.12.42:2008 => rtsp://192.168.1.28:554/11
rtsp://200.13.12.42:2009 => rtsp://192.168.1.32:554/11

I have tried to accomplish this numerous ways and I am still unable to view these streams externally. Internally, the streams function perfectly. How do I go about configuring this correctly? Thanks in advance for any assistance.


This thread was automatically locked due to age.
Parents
  • Application control? Is this a setting within the Sophos? 

    I aplogize for my overall ignorance regarding the Sophos software/environment. I am a software developer working on an application that will use a VLC plugin to view these camera streams. Our network admin is not able to look at this until next week and I am at a standstill until I can access these cameras externally. So, I really do appreciate the assistance!
Reply
  • Application control? Is this a setting within the Sophos? 

    I aplogize for my overall ignorance regarding the Sophos software/environment. I am a software developer working on an application that will use a VLC plugin to view these camera streams. Our network admin is not able to look at this until next week and I am at a standstill until I can access these cameras externally. So, I really do appreciate the assistance!
Children
No Data