Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 2 subscribers
  • Views 510914 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port Forwarding for RTSP Stream

dkirk
Hello,

I have read through and followed the suggestions on other posts regarding port forwarding (NAT) within UTM 9 however, I cannot seem to get things to work.

I have three internal cameras with which I need to allow external access to their RTSP streams. The internal url for these feeds are as follows:

rtsp://192.168.1.30:554/11
rtsp://192.168.1.28:554/11
rtsp://192.168.1.32:554/11

Using my single external IP address, I will need to specify a different port and then forward for each camera such as:

rtsp://200.13.12.42:2007 => rtsp://192.168.1.30:554/11
rtsp://200.13.12.42:2008 => rtsp://192.168.1.28:554/11
rtsp://200.13.12.42:2009 => rtsp://192.168.1.32:554/11

I have tried to accomplish this numerous ways and I am still unable to view these streams externally. Internally, the streams function perfectly. How do I go about configuring this correctly? Thanks in advance for any assistance.


This thread was automatically locked due to age.
Parents
  • 0
    @oldeda, Thanks for the assistance, I appreciate it! I have made the changes to my outgoing rule to any instead of the WAN interface and have also deleted the incoming rule since it is redundant. Still no luck on the video... [:(]
Reply
  • 0
    @oldeda, Thanks for the assistance, I appreciate it! I have made the changes to my outgoing rule to any instead of the WAN interface and have also deleted the incoming rule since it is redundant. Still no luck on the video... [:(]
Children
No Data