Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 2 subscribers
  • Views 4530 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Inbound traffic with dual wan

och_nee
Hi,

currently i'm using a leased line with a /24 public ip-subnet. these ips are configured as additional addresses on the external interface and then dnatted to internal servers. Sounds common for me. 
in the near future i'm switching to a multihomed stub, connecting with two providers via bgp. Besides bgp-configuration (which will be hard enough for me anyway!) there is one thing i cannot imagne how to realize it. 
i cannot set public ip-addresses as aditional interfaces on both wan-interfaces. 
How can inbound traffic e.g. to internal webserver be accomplished with two wan-interfaces and bgp?

thanks in advance
Toni

ASG220 v9.103.5


This thread was automatically locked due to age.
Parents
  • 0
    You need both isps to support bgp, and setup your cidr on a separate interface on your utm... I've done this for customers before, it will work.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Reply
  • 0
    You need both isps to support bgp, and setup your cidr on a separate interface on your utm... I've done this for customers before, it will work.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Children
No Data
Cookie Information Banner