This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with NAT to my Dedicated Steam Server

Hello

I searched here in the forum, but found no doubt exactly like mine.

Use the UTM Home v9.
I have a dedicated with Valve games.
I made a rule that allows all traffic from all other services out and DNAT rule input ports that games need.
But the firewall is showing that DROP connections.
Why?

What should I do?

Even disabling the IPS continues dropping


This thread was automatically locked due to age.
  • Hi ,


    Please show rules and DNAT and please attach logs that shows the block.
    Then se here can help you .

    All my best ,
    Gilipeled

    Gil Peled.

    CEO- Expert2IT LTD.

    SOPHOS Platinum Partner.

    Gil@expert2it.co.Il.

  • thanks for helping me!

    I'll post some prints!
    Recalling that by despair and attempt to open "all" in the firewall and still did not work.





    I tried several SNAT and DNAT rules but none worked

  • Hi ,


    According to shat you show and because I don't know what is your WAN address I can guess that what we see in the log is communication from other address to your WAN in port 27015 are blocked by the default rule set .
    I saw few NAT you have configured.
    Try to use DNAT that all port you want including 27015 from outside that goes to your WAN interface change destination to your PC and add the checkbox use automatic packet filter rule.
    Put it in high position even first.

    Try and inform.

    Gilipeled

    Gil Peled.

    CEO- Expert2IT LTD.

    SOPHOS Platinum Partner.

    Gil@expert2it.co.Il.

  • I created two rules DNAT and put them in the first place!

    PC_Casa COM SERVER = DEDICATED PC GAME
    Service jogos_1 port = 27000:27020



    same error

  • Brupj,

    DNAT's generally need to be in the form of:

    Source: Any/Internet
    Service: YourService
    Destination: External (WAN) Address.
    Destination Translation: InternalPC

    You have the PC as the destination in your DNAT's which will never work. Remember the Internet can't see whats behind your firewall so they contact the external IP.
  • this correct?

    Continued charging that the door is closed!





  • Hi ,

    First you show both NAT are the same.
    It looks like you have a problem with the service group definition case the NAT is OK.
    Please try the same NAT but this time add only 27015 tcp and udp.
    Lets see if 27015 is still blocked.

    Gilipeled

    Gil Peled.

    CEO- Expert2IT LTD.

    SOPHOS Platinum Partner.

    Gil@expert2it.co.Il.

  • Who is 187.57..... Showed in your log ?
    Its not the IP ADDRESS you showed that it is bloched in the test.
    You showed 200........ So please explain who is who ??


    Ally best

    Gil Peled.

    CEO- Expert2IT LTD.

    SOPHOS Platinum Partner.

    Gil@expert2it.co.Il.

  • Who is 200.... Your external WAN IP ?

    Gil Peled.

    CEO- Expert2IT LTD.

    SOPHOS Platinum Partner.

    Gil@expert2it.co.Il.