This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[9.103] UTM no longer visible on traceroutes

I actually noticed this happen on earlier releases of UTM 9. I am now running the latest standard release. After noticing the UTM no longer shows up on traceroutes, I tried several combinations of settings on the Firewall->ICMP settings but no change. Am I missing something here? Under traceroute settings I have enabled "Gateway is Traceroute visible" but not the forward traceroute option. Other enabled options include "Allow ICMP on gateway," "Gateway is ping visible," "Ping from gateway"


This thread was automatically locked due to age.
Parents
  • I'm not sure where I read it, but I just checked the Help (As Wingman says in his signature, RTFM!), and I found "Allow ICMP through gateway: This option enables the forwarding of ICMP packets through the gateway if the packets originate from an internal network, i.e., a network without default gateway."  And the other forwarding options on the 'ICMP' tab also mention, "if the packets originate from an internal network, i.e., a network without default gateway."

    Beginning in V9, you have to make manual firewall rules to allow ICMP traffic from the Internet.

    Cheers - Bob
Reply
  • I'm not sure where I read it, but I just checked the Help (As Wingman says in his signature, RTFM!), and I found "Allow ICMP through gateway: This option enables the forwarding of ICMP packets through the gateway if the packets originate from an internal network, i.e., a network without default gateway."  And the other forwarding options on the 'ICMP' tab also mention, "if the packets originate from an internal network, i.e., a network without default gateway."

    Beginning in V9, you have to make manual firewall rules to allow ICMP traffic from the Internet.

    Cheers - Bob
Children
No Data