This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Smartphone notifications not working

Current setup:

UTM 220 9.101-12 with Web Filtering enabled in Standard mode.  With backend AD Authentication.
AP30 with two networks - Public on wLan0 and Corporate bridged AP to Lan

Whenever connected to either wireless network my users do not receive the following notifications:

Google Talk (Hangouts as its called now)
Yahoo Mail
Gmail
There might be others that I haven't been informed of.  

All the services work except for the notifications.  Mostly Android handsets and a couple Iphones.  I am seeing errors in the Firewall log like below.  Do I need to go through each error and open the port?  I would have assumed that if the services were working that the notifications would as well.  Any help is greatly appreciated!  Thanks!

14:18:24 Default DROP TCP 192.168.0.44 : 59827 
 → 173.194.68.188 : 5228 
 [SYN] len=60 ttl=63 tos=0x00 srcmac=5c:a:5b:45:1c:fd dstmac=0:1a:8c:33:16:40 
 

14:18:24 Default DROP TCP 192.168.0.44 : 49614 
 → 199.167.177.39 : 1237 
 [SYN] len=60 ttl=63 tos=0x00 srcmac=5c:a:5b:45:1c:fd dstmac=0:1a:8c:33:16:40


This thread was automatically locked due to age.
Parents
  • What about the Corporate bridge to Lan? Are these connections ruled by the Internal Network Interface or are they governed under the Wireless Network Interface as well?

    The "Bridged to AP LAN" wireless is just like a wired Ethernet segment bridged to the LAN - all of the IPs are in "Internal (Network)" and all of the rules that apply to internal, wired users apply to the Corporate wireless.

    Cheers - Bob
Reply
  • What about the Corporate bridge to Lan? Are these connections ruled by the Internal Network Interface or are they governed under the Wireless Network Interface as well?

    The "Bridged to AP LAN" wireless is just like a wired Ethernet segment bridged to the LAN - all of the IPs are in "Internal (Network)" and all of the rules that apply to internal, wired users apply to the Corporate wireless.

    Cheers - Bob
Children
  • That's what I figured but I'd thought I'd verify that.  Thanks.  

    So here is the loaded question of the day, since we have people in and out of our office using the public network, how much harm would be done if my packet filter allowed Any traffic through?  I have a feeling that chasing down programs that aren't working properly on guest computers and finding individual ports to open is going to be a daunting task!  As long as my public network is on a separate zone I shouldn't have to worry about any security breaches making it to my internal network correct?  

    This is my first Sophos UTM and I appreciate an advice you can provide!