This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPS - Performance Problem

Hi guys,

I have a little performance issue and I hope anyone have an idea , how I can go on.

At this moment, it occurres only @home
Software Appliance - Version: 9.101-12

Internet - cable modem bandwidth100-120mbit/s - UTM
With the version 9.0, I have a throughput of 80-90mbit/s.

Since the update to 9.1, the throughput is only 20-30mbit/s (same config, same system).
If I disable the IPS, I get great values ​​again 100-110mbit/s. 
In the IPS configuration I select only the systems I use. I active the IPS and after seconds... I have the bad values again.

This is only from WAN to LAN. From LAN to DMZ, everything is all right.

Nice greetings


This thread was automatically locked due to age.
Parents
  • I am using Windows 2012 Hyper-V and its an intel nic on a Dell Poweredge 1950.
  • I have has some performace issues with the current 9.101-12 IPS. Downloading from several speed test sites showed a reduced throughput. Drilling down I discovered the port scanner as being one of the contributors. The second item was in in attack patterns>Operating system speciffic>linux. Using both in addition to using attack patterns>attacks against client software>browser an average of 10 mb + was lost on both speed test.net, comcast speed test, and actual down loading. Currently the port scanner is off.

    Thanks,
    Jim
  • I have has some performace issues with the current 9.101-12 IPS. Downloading from several speed test sites showed a reduced throughput. Drilling down I discovered the port scanner as being one of the contributors. The second item was in in attack patterns>Operating system speciffic>linux. Using both in addition to using attack patterns>attacks against client software>browser an average of 10 mb + was lost on both speed test.net, comcast speed test, and actual down loading. Currently the port scanner is off.

    Thanks,
    Jim


    These settings don't make a difference in my case. Only disabling IPS gives me full bandwidth.
Reply
  • I have has some performace issues with the current 9.101-12 IPS. Downloading from several speed test sites showed a reduced throughput. Drilling down I discovered the port scanner as being one of the contributors. The second item was in in attack patterns>Operating system speciffic>linux. Using both in addition to using attack patterns>attacks against client software>browser an average of 10 mb + was lost on both speed test.net, comcast speed test, and actual down loading. Currently the port scanner is off.

    Thanks,
    Jim


    These settings don't make a difference in my case. Only disabling IPS gives me full bandwidth.
Children
No Data