Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 2 subscribers
  • Views 9260 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firewall rule not working

tuscani
Hello, we have a firewall rule in position 2 that allows two external IPs (they are in a network group) Any/Any access to the internal LAN. The external IPs are VOIP providers that use upper level UDP Ports. Yet the firewall is still dropping the packets. Any idea why? 

The firewall rule in postion 1 is Any\Any\Any but is disabled.

2013:04:17-13:33:42 @ ulogd[4267]: id="2001" severity="info" sys="SecureNet" sub="packetfilter" name="Packet dropped" action="drop" fwrule="60001" initf="eth1" srcmac="b8:9b:c9[:D]9:55:ba" dstmac="0:1a:8c:13:61:31" srcip="x.x.x.x" dstip="y.y.y.y" proto="17" length="132" tos="0x00" prec="0x20" ttl="117" srcport="26055" dstport="2108"


This thread was automatically locked due to age.
Parents
  • 0
    Hi,

    1. If you're using RFC1918 IP addressing in your LAN, you need a DNAT also.
    If you have one, please post a screenshot of it.

    2. please post a screenshot of your firewall rule and the related host/network definitions.

    Barry
Reply
  • 0
    Hi,

    1. If you're using RFC1918 IP addressing in your LAN, you need a DNAT also.
    If you have one, please post a screenshot of it.

    2. please post a screenshot of your firewall rule and the related host/network definitions.

    Barry
Children
No Data