Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 2 subscribers
  • Views 4252 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Unable to setup NAT rule

xp3000
Hi,

I'm trying to setup a NAT rule to allow our HQ to connect to the UTM9 firewall on external interface on our public ip and port 8787 and then forward this to an internal webserver running on port 8787.

i've attached a couple of screenshots to see what i'm doing wrong, also on our external interface we're getting a error in UTM GUI.


This thread was automatically locked due to age.
Parents
  • 0
    This is what's from the firewall log:

    2013:03:04-14:37:47 utm01 ulogd[7695]: id="2001" severity="info" sys="SecureNet" sub="packetfilter" name="Packet dropped" action="drop" fwrule="60002" initf="eth2" outitf="eth0" srcmac="44[:D]3:ca:5e:a:c0" dstmac="0:50:56:87:4b:31" srcip="81.138.158.189" dstip="172.16.32.102" proto="6" length="48" tos="0x00" prec="0x00" ttl="111" srcport="54305" dstport="8787" tcpflags="SYN"
Reply
  • 0
    This is what's from the firewall log:

    2013:03:04-14:37:47 utm01 ulogd[7695]: id="2001" severity="info" sys="SecureNet" sub="packetfilter" name="Packet dropped" action="drop" fwrule="60002" initf="eth2" outitf="eth0" srcmac="44[:D]3:ca:5e:a:c0" dstmac="0:50:56:87:4b:31" srcip="81.138.158.189" dstip="172.16.32.102" proto="6" length="48" tos="0x00" prec="0x00" ttl="111" srcport="54305" dstport="8787" tcpflags="SYN"
Children
No Data