This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QOS limiting few group of users and exception to managers

hai,

i want to know how QOS actually works, any help will be highly appreciated.

i have two internet lines eth1 (10MB dedicated), eth2 (ADSL 4 MB) and internal on eth0. (uplink balancing)

now i want to create one normal user group for them only 2MB bandwidth should be allowed and for manager group remaining bandwidth.

so far i had done.

NOTE: i am testing only for normal group for which the bandwidth should be only 2MB, manager group having internet from separate gateway.

traffic selector: normal group>>any services>>any (bound to internal)
Guaranteed Bandwidth: 2048 kbit/s Specifiy upper bandwidth limit: 2048 kbit/s

only two pc's connected for test in normal group while i am monitoring the bandwidth graph using solarwinds bandwidth monitor my outgoing traffic increasing more 2MB.

my goal to get only 2MB bandwidth for noraml users. i am missing something should i do traffic selector (bound to external)..

please help..

This thread was automatically locked due to age.

Parents

0 BAlfson over 12 years ago

Good question - As far as the Internal interface is concerned, my traffic selector matches "outbound" traffic - into the internal network.

As for traffic outbound to the Internet, your original selector, bound to External, would work, but I think you're better off guaranteeing bandwidth to the "Special" traffic.

Cheers - Bob

Sorry for any short responses! Posted from my iPhone.
Cancel
Vote Up 0 Vote Down

Cancel
0 deltaline-IT over 12 years ago in reply to BAlfson

Thanks again for your kind explanation ....

you trying to say if i want to limit normal group (traffic going from internal network) to 2MB where i have two internet link (load balancing) for this i have to create  traffic selector

normal group>> any>>any  (traffic selector)

at traffic pool
guarantee band 1024 Kbit/s  and
upper bandwidth limit 1024 Kbit/s

  i should bound to both internet links (one by one)

by this i will limit outbound traffic for normal group to 2 MB right?

then i need to check bandwidth flow graph on eth1 and eth2 (both externals).

did i understood the concept in right way please suggest ?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 deltaline-IT over 12 years ago in reply to BAlfson

Thanks again for your kind explanation ....

you trying to say if i want to limit normal group (traffic going from internal network) to 2MB where i have two internet link (load balancing) for this i have to create  traffic selector

normal group>> any>>any  (traffic selector)

at traffic pool
guarantee band 1024 Kbit/s  and
upper bandwidth limit 1024 Kbit/s

  i should bound to both internet links (one by one)

by this i will limit outbound traffic for normal group to 2 MB right?

then i need to check bandwidth flow graph on eth1 and eth2 (both externals).

did i understood the concept in right way please suggest ?
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data