This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

With two DHCP, the internal network card stops working

Sophos set up a virtual UTM apliance in customer interface Internal eth0, I created an additional address range with another, called the DMZ, created a pool of DHCP for eth0 Internal network and a DHCP pool for the DMZ interface eth0, getting:

Internal eth0 = 192.168.0.20 - 192.168.0.100/24
Dmz eth0 = 192.168.1.100 - 192.168.100.120/24

When you restart the Sophos UTM is the physical interface with the internal link = UP
And with the status = down, the status comes back UP if I disable both DHCP services.

Why does this happen? On Debian Linux I can create two pools of static, with two different ranges, using the same interface eth, and then separate networks that are on the same LAN.

Thank you one and await help


This thread was automatically locked due to age.
Parents
  • Ahhh!  You're right - that's the first I'd noticed that in V9!

    I have yet to play with it though, so I don't think it's possible to "choose" which DHCP server applies to a request for a dynamic address assignment.  I bet you can't have more than one server on an interface that supplies dynamic IPs - has anyone experimented with this?

    I see that it is now possible to assign different default gateways for statically-mapped IPs though - that's an advantage compared to V8.

    Cheers - Bob
Reply
  • Ahhh!  You're right - that's the first I'd noticed that in V9!

    I have yet to play with it though, so I don't think it's possible to "choose" which DHCP server applies to a request for a dynamic address assignment.  I bet you can't have more than one server on an interface that supplies dynamic IPs - has anyone experimented with this?

    I see that it is now possible to assign different default gateways for statically-mapped IPs though - that's an advantage compared to V8.

    Cheers - Bob
Children
No Data