Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 2 subscribers
  • Views 13830 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Voip No Outgoing Audio

ChrisTwigg
Hi

We had 
1 internal subnet 192.168.1.0/24
1 external internet 91.208.*.*

We have added a new internal subnet of 172.1.1.0/24 to allow for more internal IP addresses and to section off the Voip phones.

The phones on the internal 192.168.1.0/24 range works perfectly for voice both in and out without problems or running the VOIP security.

When a phone is setup on the 172.1.1.0/24 subnet it makes and receives calls perfectly but no outgoing voice.

I have cloned all firewall rules from the internal network 192.168.18.0/24 but still no joy.

I have checked the live firewall log but no packets are being dropped.

Any idea's would be greatly appreciated.

Kind regards

Chris


This thread was automatically locked due to age.
Parents
  • 0
    Ahhh, a second WAN connection - you were holdin' out on us! [;)]

    Uplink Balancing with Multipath is definitely what you want.  Check out this thread.

    However, you'll want the Policy Routing approach if you want to do the following...

    If you want to encrypt the VoIP traffic and send it through an IPsec tunnel on the 100Mb connection in case the 10Mb connection fails, then start a separate thread in the VPN section.

    Cheers - Bob
Reply
  • 0
    Ahhh, a second WAN connection - you were holdin' out on us! [;)]

    Uplink Balancing with Multipath is definitely what you want.  Check out this thread.

    However, you'll want the Policy Routing approach if you want to do the following...

    If you want to encrypt the VoIP traffic and send it through an IPsec tunnel on the 100Mb connection in case the 10Mb connection fails, then start a separate thread in the VPN section.

    Cheers - Bob
Children
No Data