Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 2 subscribers
  • Views 1856 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DMZ issues

idealservice
I've spent more than 8 hours configuring the dmz network but with no luck. I can't access my terminal server from the outside. With my old ipcop everything works fine. The server receives and sends the initial packets, but I can't connect to it. Am I missing something? Some screenshots attached. Using astaro 425 with 8.302 fw.


This thread was automatically locked due to age.
Parents
  • 0
    Yes, it's set.
    I've also done this test: I forwarded the same 3389 port from outside to an internal server, with no luck.
    There is a cisco linksys router (that will be removed soon) between the external line and the asg, but the ipcop works fine with this, as I told.
Reply
  • 0
    Yes, it's set.
    I've also done this test: I forwarded the same 3389 port from outside to an internal server, with no luck.
    There is a cisco linksys router (that will be removed soon) between the external line and the asg, but the ipcop works fine with this, as I told.
Children
No Data